Silicone Emergency Tape All Purpose Repair Wrap

 »» Originally created for the military!

Automotive, Marine, Trucking, & RV, Aviation, Electrical, Plumbing, Agriculture, Industrial.

• Self Fusing
• Water Proof
• Air Tight
• 700 PSI Strength
• Resists 500*F (250*C)
• Insulates 8000 Volts

Resists Fuel, Oil, Solvents, Salt, Water, Road Salt, UV Rays, Electrical Currents.

• Radiator Hoses
• No Adhesives
• Stretch
• Plumbing Pipes
• Tool Grip
• Air & Fuel Hoses
• Vacuum & Heater Hoses
• Electrical Wires & Cables

View Gallery »  View Our Ad »  View / Print Instructions »

Instructions / Directions:

1. Wrap tape around damaged area by stretching and overlapping 50% of tape already applied so that ½ the width is covered with the next wrap around. Stretch tape to maximum capacity for High pressure leaks to ensure stronger and tighter bond.
2. Emergency Tapes first and last wrap should completely overlap its previous wrap to ensure a complete and sealed bond. It is highly recommended to use additional layers of tape if necessary over affected areas. The same directions in line (1) should be used over the previous layers. Emergency tape is not reusable.
3. Emergency Tape is not recommended to be repositioned after initial wrapping. Tape can be reapplied over existing tape at anytime for further strength.

Suggestive Applications:

It is recommended that additional tape is used for high pressure leaks. Tape should be wrapped between 3-5 layers thick. It is also recommended that the application of Emergency tape be started 3-5 inches from the damaged area for best results. Additional tape can always be applied over existing tape for further strength.

This product is provided without warranty, either expresses or implied, for a specific purpose. Because conditions and use are beyond the manufacturer or distributor’s control, neither manufacturer or distributor or seller will assume any responsibility for the use or misuse of this product. This includes, but is not limited to any consequential damages.